Water Record Residential water, on the record.

Iron bacteria

Living organisms that combine iron or manganese with oxygen into rust deposits and sticky slime on pipes, pumps, and fixtures - not known to cause disease, per MDH, but capable of clogging wells and sheltering organisms that do.

The numbers

StandardValueApplies toSource

Treatment families

chlorination

This record is read from the Minnesota Department of Health’s iron bacteria page (health.state.mn.us, accessed 2026-11-21).

What they are. Small living organisms, naturally present in most soils and shallow groundwater, that “combine iron (or manganese) and oxygen to form deposits of ‘rust,’ bacterial cells, and a slimy material that sticks the bacteria to well pipes, pumps, and plumbing fixtures.” MDH is explicit on the health framing: not known to cause disease — but they can create conditions where disease-causing organisms grow, reduce well output, and clog equipment. The to-be-safe move on the same page: test for coliform and nitrate.

The recognition kit, per MDH. Tastes and odors: swampy, oily or petroleum, cucumber, sewage, rotten vegetation, or musty — often strongest after water sits unused. Color: yellow to brown stains, and a rainbow, oil-like sheen on standing water. Deposits: sticky rusty, yellow, brown, or grey slime, and “feathery” filamentous growths in standing water. Lab testing confirms.

Why prevention gets equal billing. Iron bacteria usually arrive — on undisinfected water used in drilling or priming, on equipment laid on the ground during repairs. MDH’s prevention list is a well-owner’s checklist: only disinfected water down the well (never lake or pond water), a watertight cap at least a foot above grade, and disinfection after any repair.

Treatment is a professional ladder, stated honestly. MDH’s own framing: elimination “can be difficult and expensive” and may be only partly effective. The sequence runs physical removal (pulling and cleaning the pump, scrubbing the casing), then chemical treatment — disinfectants first, with shock chlorination near but not above 200 ppm, because stronger solutions disinfect less effectively. Surfactants and acids are professional-only steps, and MDH warns plainly: never mix acid and chlorine. Pasteurization (140°F held 30 minutes) exists at the expensive end. Continuous chlorine injection is one MDH generally recommends against — it can mask other bacterial contamination while corroding the system.