Water Record Residential water, on the record.

Hardness (calcium and magnesium)

Dissolved calcium and magnesium. Heated, they precipitate as scale in pipes, water heaters and appliances; in the sink they make soap scum and spotting. USGS classifies water harder than 180 mg/L as CaCO3 as very hard.

The numbers

StandardValueApplies toSource

Treatment families

water-softener · ion-exchange

Hardness is dissolved calcium and magnesium, and the USGS classification bands (USGS Water Science School, Hardness of Water, accessed 2026-11-20) are the reference scale:

Band mg/L as CaCO₃
Soft 0 – 60
Moderately hard 61 – 120
Hard 121 – 180
Very hard more than 180

The damage is mostly thermal. When hard water is heated it deposits solid calcium carbonate — USGS notes the buildup shortens equipment life, raises heating costs, cuts heater efficiency and obstructs flow. Cold-side effects are cosmetic but constant: soap reacting with calcium forms soap scum, and glassware dries with spots and film USGS describes as “not dangerous, but unsightly.”

Hardness has no EPA secondary standard of its own — the staining and deposit effects show up under total dissolved solids in EPA’s aesthetic table — so the USGS bands are the practical scale for deciding whether softening is worth it. There is no safety case for a softener; it is an economics-and-comfort decision about scale, appliances and cleaning.

Softening by ion exchange swaps calcium and magnesium for sodium on a resin bed. One sizing caution from the iron record applies in reverse: iron in well water fouls softener resin, so a hardness test for sizing should come with an iron number.