Chlorine and chloramine
The disinfectants your utility adds on purpose. CDC puts acceptable residual levels at up to 4 mg/L. Chlorine off-gasses from a standing glass; chloramine persists - which is both the diagnostic and the reason their removal differs.
The numbers
| Standard | Value | Applies to | Source |
|---|
Treatment families
activated-carbon
This is a city-water entry in a well-heavy catalogue, and it starts from a fact the marketing around it tends to skip: the disinfectant is there on purpose, keeping the water safe between the plant and your tap. CDC states that chlorine or chloramine levels up to 4 milligrams per liter are considered safe in drinking water (CDC, About Water Disinfection with Chlorine and Chloramine, accessed 2026-11-20). Treating the taste is legitimate; treating it like a hazard is salesmanship.
The two disinfectants behave differently, and CDC’s distinction is the useful one: chlorine depletes quickly in the pipes, while chloramine keeps killing germs longer - it is the more persistent molecule. That persistence shows up in your kitchen: chlorine will leave a glass of water that sits out (CDC’s own note for aquarium and dialysis use is that sitting out for a few days removes chlorine), while chloramine cannot be removed that way. A taste that fades on standing points to chlorine; one that does not points to chloramine - and your utility’s annual water quality report will say which one you have.
For point-of-use taste treatment, activated carbon is the standard tool for chlorine. Chloramine is the harder target, consistent with everything above; the specifics of chloramine-rated media are held until this site has a sourced basis to state them, rather than rounding the two chemicals into one recommendation.